Alright, let me tell you about this little project I cooked up, the “shape shifter’s lightning staff”. It started kinda randomly, really. I was cleaning out the garage and found some old PVC pipes and leftover electronics bits from another thing I was messing with. Just looking at them, the idea popped into my head – what if I made a prop staff, something cool, maybe for a costume or just to display?

Getting Started – The Basic Shape
So, first thing, I grabbed the longest piece of PVC pipe I had. It was a bit grimy, so I gave it a good clean. Didn’t want nasty stuff on my finished piece, right? I figured out how tall I wanted it to be, roughly up to my shoulder. Marked it with a pencil and sawed it down to size. Made a bit of a mess with plastic shavings, but hey, that’s part of the fun.
Then I thought about the “shape shifter” part. How could I make it look like it changes? I didn’t want anything too complicated, honestly. My idea was simpler: make some parts slide or attach differently. I took a smaller diameter pipe section and figured out how to make it slide inside the main one, maybe reveal something underneath or extend out. I cut some slots in the main pipe and made a little locking pin from a bolt I had lying around. It wasn’t super smooth at first, took some sanding inside the pipe to get it moving okay.
Adding the “Lightning” Flair
Okay, the basic staff shape was there, kinda boring though. Needed some pizzazz. That’s where the “lightning” came in. I remembered I had a strip of blue LEDs and a small battery pack. Perfect!
- Wiring: This was a bit fiddly. I drilled small holes along one section of the staff where I wanted the lights. Then I carefully fed the LED strip inside. Getting the wires down to the bottom where I planned to hide the battery pack took some patience and a long piece of wire to fish them through.
- Powering it up: I found a simple push button switch in my parts box. I cut a small hole near where my hand would naturally hold the staff and wired the switch between the battery pack and the LEDs. So, push the button, ZAP! Instant lightning effect (well, blue lights turning on).
- Making it look less like pipe: Plain white PVC isn’t very mystical. So, I got out some spray paint. A base coat of black, then I tried some dry brushing with silver and a bit of metallic blue to give it a worn, kinda magical metal look. I also wrapped some old faux leather strips around the handle area to make it grippier and hide the switch area better.
Putting it All Together and Testing
Once the paint dried, I put the sliding part back in and tested the locking pin. It worked! Kinda clunky, but it held. Then came the big moment: hitting the button for the lights. Success! The blue LEDs glowed nicely through the holes I drilled, giving it a cool pulsating effect, especially in a dim room. It wasn’t exactly Hollywood special effects, but it looked neat.
The “shape shifting” is basic, just extending a section, but combined with the lights, it felt pretty good. I swung it around a bit (carefully, didn’t want to break it after all that work). It felt sturdy enough. The weight was okay too, not too heavy.

Final Thoughts
So yeah, that’s the story of the shape shifter’s lightning staff. Started with junk, ended with a pretty cool prop. It wasn’t a super complex build, took maybe an afternoon and a bit of the next morning, mostly waiting for paint to dry. It’s fun sometimes to just take random bits and see what you can make. It’s sitting in the corner of my room now, looks kinda cool when I turn the lights on. Definitely a fun little weekend project.